Mufflers?

[BIGEVIL]

Does your car actually lay frame?

Not yet. I just had the whole exhaust redone a few weeks ago to allow for it. The old system had some flowmasters right under the front seats and hung down low enough to high center on many things. I also had the rear section run UNDER the axle.

Just a matter of saving up a little more money.

[Creepy Cruiser]

I feel ya. When I did mine, I had to cut through all the cross members and reinforce them for the exhaust, to keep everything above the bottom of the frame for dragging. Mine actually still run over the axle, it was real tricky though to run it that way and still stay far enough away from the airbags. I had to go over the axle in order to be able to droop the rear suspension far enough to get my wheels off, lol. (my skirts don't really come off very easy anymore).

Are you going to do air or oil?

[Dropped84]

Im runnin stock myself now, was thinkin of putting somthing on with a lil rumble. I dont like quite exhaust for cruisin.

[Zachary]

In my opinion Flowmaster offers the best sound and just enough back pressure for proper performance. Everything else sounds like shit in comparison.

[Klabee]

honestly...i dont have any with the length of that tailpipe...

i have faker lakers...but no muffler....just straight out...

cant wait til i do hook up the lakers...

[deadw8mike]

I have dual exhaust installed with high flow catalytic converters, flowmaster mufflers all mounted in four inch exhaust pipes.

[Klabee]

I feel ya. When I did mine, I had to cut through all the cross members and reinforce them for the exhaust, to keep everything above the bottom of the frame for dragging. Mine actually still run over the axle, it was real tricky though to run it that way and still stay far enough away from the airbags. I had to go over the axle in order to be able to droop the rear suspension far enough to get my wheels off, lol. (my skirts don't really come off very easy anymore).

Are you going to do air or oil?

Thats what I had explained to these muffler morons here...to drill/cut a 2.5 inch hole thru the frame and weld a long gussett/scab all 4 sides to strengthen uo the hole ...and then put the 2'' exhaust thru to hook up the lakers...they are afraid to do it...I dont have all the tools.....fuck it ..I will rent what I dont have but I want those Lakers hooked up this summer.

[Highbars]

Side-pipes, no baffles, 2 1/2" OD, 9 ft. long, black, with chrome tips.. Not the best for performance, I noticed the decline, but if you want noise when you punch it? Got that covered very well.