Hearse Parts Needed?

[Zachary]

At Twisted Steels suggestion...

If you need a specific part, reply to this post with what you need, coachbuilder if applicable and the year. That way when other members are out in the junkyards we can pull the parts or direct you to where they are at.

Glass especially would be a good thing to mention here if you need it!

[Fire Freak]

Ok here is the list. 1970 cadillac 3-way. I'm still trying to figure out the maker.

Landau bars and mounting gear

Curtains(red.) I can make these, but if you see some original grab em.

Headliner. Same as the curtains

Front windshield.

[Twisted Steel]

OK i confirmed - I know a guy in arkansas that has a 73 3 way sitting in his yard. Its white and need some work but could be restorable. He said it starts and runs so thats cool.
The interior is blue - a bit ruff but can be restored with some tlc as well.

I have a few pics is anyone needs em.

TS

[Linnea]

I need the piece of chrome trim on my back door. A working dash/gauges, and a 3 way table.

[Fire Freak]

Ok scratch the other parts. Here is what i need for my 1970 miller meteor hearse.

metal door trim. Back drivers side door.

Heater blower motor. (zachary is working on that one)

[Twisted Steel]

Do you really need the entire door?

[Fire Freak]

<div>
(Twisted Steel @ Nov. 27 2006,16:54)</div><div id="QUOTEHEAD">QUOTE</div><div id="QUOTE">Do you really need the entire door?</div>
No i need the metal trim on the door.

[Undertak8184]

Hey twisted email me at Undertak8184@aol.com Im interested in the 73 in Ar.

Thanks

[Joeyp]

Hey pal&#33;

Most landau bows are not maker specific anymore. Especially since the 80s. Let me know length, width, style, etc and I&#39;ll call my manufacturer and or supplier. Then I&#39;ll get back to you&#33;

I need a Deville A/C compressor/ dryer etc.

Pax Eternis&#33;

Joey

[casketmaker]

My 66 Olds Cotner Bevington Seville combo/coroners car needs so many parts I wouldn&#39;t know where to begin. Has anyone ever tried to make Landau panels for the rear windows of a combo before? If so how did they come out and what did you use. I was thinking about using ply wood and covering it with fiberglass but I&#39;m still not sure how to get the correct repro. Landau bars. The good news is that I have a line on a 455 police intercepter engine and tranny to drop in. It needs a rebuild but he is thinking about selling me the whole car. I could use the updated suspention, drive shaft, engine, tranny and various other small parts.

If anyone finds a 66 Olds 98 in a junk yard I could use some parts off of it like
a glove box door with latch,
drivers door panel,
drivers door opening handle and assembly,
ignition with key and
chrome strip from the hood.

[Tulsa Guy]

Casket table for &#39;64 Flxible combination

[Twisted Steel]

Im headed to the junk yard this weekend - ill update with anything i find.

[deadbride]

Hey guys. I&#39;m looking for the passenger side rear quarter panel for an 86 Buick LaSabre Estate Wagon Hearse by Superior. The one Aprylla had that was hit by the train. The guy in Ohio wanted &#036;750 plus shipping for the quarter panel and back door. More than I paid for the car. Ouch. I couldn&#39;t afford that. I found a quarter panel from an estate wagon for &#036;100 but I&#39;d still have to rebuild the interior superstructure with angled steel. So I&#39;d rather get a panel that was already complete. And the backdoor I don&#39;t think is a standard station wagon door. The glass is in tact but the door is damaged. Any leads would be great. Thanks. Does that all make sense?

[Twisted Steel]

guy is parting out a 64 cadi

www.ebay.com

Item number: 250093892710

http://cgi.ebay.com/ebaymot....&rd=1,1

[tortured_serenity]

Need rear door

I need the whole back door for my 1983 cadillac superior. Also need the chrome surround around the tail light.

Thanx