Hearse Parts Needed?

[eighties1]

1967 Superior non-crown parts needed:

Left and right rear bumper sections between the bumper ends, possibly the license plate assembly. Not sure if these are Superior specific, most coaches seem to use similar bumper assembly.
Drivers door glass
Fender skirts
Aluminum trim around the interior windows
Sconces

Thanks in advance,
Anthony

[Carl Hardee]

I need a drivers window for a SS Fleetwood 1988. Any help would be greatly appreciated.
Carl

carl.hardee@att.net

[mr x]

you should be able to get the blower motor new at your local parts store for like 35 to 45 bucks. O got the one for my 69 last year at auto zone. Most of the under the hood stuff is standard cadillac.

[obama549]

I need the piece of chrome trim on my back door. A working dash/gauges, and a 3 way table.

Ok scratch the other parts. Here is what i need for my 1970 miller meteor hearse.

metal door trim. Back drivers side door.

Heater blower motor. (zachary is working on that one)

_________________
cheat codes
game cheat codes

[morbid]

Heater core i need is for the front and the only glass that isn't broken is the drivers door and the two back doors. .need rear door glass,both sides in the back,passenger door and windshield. . also the removeable landau panels if i can find em!

[pyro]

what glass. leaf springs are almost always shot, as Cadillac put the plastic, water trapping spacers between the leafs. Best to just have new ones built. Heater core for ther front or back.

[morbid]

I need glass for my 64 m&m combo. . leaf springs. . and a heater core. . I'm in oklahoma. . e-mail me at morbid.mime@yahoo.com. . thanx

[Tic-Tac-Toe-Tag69]

Ok help me ut here guys please!!!! I have a 1968 Cadillac Hearse Combo. I need some trim, in good condition that I can clean up really nice. I need the top piece for the windshield, but what I really need I am not sure of the name but the piece on the back of the car, well a little past the middle, I need the big chrome pieces that go over the top...not the whole piece! Just the lower pieces that have ridges/lines on it??? One broke while removing it and the other one is kinda bent up. I could use a rear bumper but I may be able to fix mine. I need a gas tank as well b/c its definately not the original and for some reason whoever had it before lowered it. haha I need a dome light lense for the inertior back section, The one dome light is complete but the other is missing its lense. Possibly an original fuel gauge as well mine seems to be off. Thats all I can think of for now. Anyone got anything? Or any idea where to look? Thanks!

[dadsshop]

parts

Could you send me some pictures? dadsshop@yahoo.com

[Dr.Feelgood]

I have a set of 8 rollers. I'm asking $60 plus shipping.

[dadsshop]

motorcycle hearse

I need everything that goes on the floor in the back of a hearse. Rollers, bars. bier pins and so on. Anyone know where I can get some used?? Thanks, A.J.

[pyro]

So this is a good price? I have a guy here that wants to sell me the 429 engine and tranny combo out of a running caddy at this time for 300. Think I should grab it? I currently have 2 350's but I am afraid I won't have enough power.

running 429 is gone. I have a 429 short block thats stuck. rebuildable. 390 short block, stuck, rebuildable. Running? 390. Motor turns. And a running 390 available

[Dr.Feelgood]

I need 64 Cad superior rear fin trim

[msc0nduct]

Dont know if this will be a duplicate; I have a 64 Cad 429 & tranny combo. Complete. Lots of 64 Cad parts also. 300 for the eng/tranny

email me at choppergod76@hotmail.com

So this is a good price? I have a guy here that wants to sell me the 429 engine and tranny combo out of a running caddy at this time for 300. Think I should grab it? I currently have 2 350's but I am afraid I won't have enough power.

[Elvirathehearse]

Nevermind, found all the parts I was looking for, except the rubber replacement parts, still looking for those.