Announcement

Collapse
No announcement yet.

part needed badly

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • part needed badly

    HELP!!!!!!!!
    I have a 1981 caddy s&s victoria.
    Has the 6.0 liter engine in her , i am in desporate need of the bearing that holds the drive shaft up in the center but am told by EVERY parts place it is discontinued......... any suggestions PLEASE!!!!!

  • #2
    Try Bearing Distributors. http://www.bdi-usa.com/ May be a long shot. But they only deal in bearings, all sizes. I'll try to get under my 80, to see what it looks like.

    Comment


    • #3
      Theres a place here in Macon, Bearings and Drives Inc. If they don't have it, they can make it.

      here's their site http://www.bdindustrial.com/index.php

      Comment


      • #4
        thank you !!!!! i will check out those sites , i have had her on a lift and know what the bearing looks like and havent been able to match it to anything else,

        Comment


        • #5
          Get the bearing number, they can cross reference it and find one that works.

          Comment


          • #6
            Riff Raff i have already tried to do the cross over and every time it gives a part number that part dont match up to the way it bolts to the car. ..... anyone know of a company that will rebuild the complete unit?? The rubber section in mine is shot , lets the entire driveshaft move around to much.

            Comment


            • #7
              Try this, they have several for caddys, including one for factory limos, might be the correct one.


              Comment

              Working...
              X