Announcement

Collapse
No announcement yet.

back seats in your hearse.....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • back seats in your hearse.....

    Ok I was always against doin this, but Ive come to the conclusion that its the biggest car I have and is basically a 2 seater... I have a 84 cadillac Eureka, the table and rollers and casket were all in place the way it should be, but I was able to pull the table out in one PC for future use, now wanna put a back seat in to be able to haul more people/family for that matter..... I hate losing the casket to do this, so would it be dumb to cut it in half to still be able to be seen if following behind and plus to hide my hydrauilcs in it, So this way I can have a seat, room for sub woofer box, half a casket with hydros in it etc. I was gonna do the whole fold down wagon/van seat but with the casket havin the hydros in its not easliy removable, sorry for rambling on Im a lil drunk, but just lookin for some clean ideas people have done to put a back seat in, Thanks

  • #2
    Rob Spallone in our club used to have a casket end for this purpose. The casket end was used for display models in funeral homes, so if you call around some you might be able to find one...as illustrated here -

    Comment


    • #3
      Gonna do the same to my 63 Superior. The young lad likes to sit in the jump seats of my 63 M&M.

      Comment


      • #4
        Originally posted by Zachary View Post
        Rob Spallone in our club used to have a casket end for this purpose. The casket end was used for display models in funeral homes, so if you call around some you might be able to find one...as illustrated here -

        This is a great idea and all this time I have been looking for a 5 ft childs casket.

        Comment


        • #5
          Whats up 84?
          Let me know when ya get back goin on this. I can give ya a hand. I have a few ideas, bout this I'll bounce em off ya.
          Got mine back up and running, while after we talked.
          Time for beers, and power tools

          Comment


          • #6
            Fats bought a hearse almost exactly like mine except a year newer. I was with him when he bought it and the old owner cut out the floor and put in bench seating that folded down so it could still accomodate a full size casket. Fats then had the idea of lowering that seat even more and building the rest of the table on it with rollers and such (although he has yet to get that involved with it due to the freezing weather. I sat in it and it was really comfortable.

            I have a similar idea but I want to make benches that function like those jump seats in the combination ambulances.

            Comment


            • #7
              "Rob Spallone in our club used to have a casket end for this purpose. The casket end was used for display models in funeral homes, so if you call around some you might be able to find one...as illustrated here - "

              That is incredibly awesome! If anyone else tracks down one (preferrably black) that they don't want, pop me a message. That would be beautiful for the back of my Bella!
              Last edited by creepypt; 02-06-2011, 01:10 PM. Reason: typonese

              Comment


              • #8
                If anyone has one in black, yellow, red, or silver I am interested.

                Comment


                • #9
                  My rear seat install can be found at this thread:

                  Comment


                  • #10
                    Let me check my distributor, I have sold end cuts before. I made a couple end tables from them also

                    Comment


                    • #11
                      Well I got my table out in pretty much one pc, I still have all the rollers and everything, had to take most of them out, but heres afew pics of wut Im lookin to do, everythings just sitting in there to get a feel how I wanna do things, but I think this should work for what Im tryin to achieve and keep the casket, Ill post up more pics once I get workin on it, opinions and suggestions are wanted, ThanksHearse seat 001.jpgHearse seat 004.jpgHearse seat 010.jpgHearse seat 013.jpg

                      Comment


                      • #12
                        you might want to move the seats over to the left a little , so that the back of the seats can lean back more. They look a bit to strait up to be comfterable.Are they still on the tracks that alow them to slide forwards and back?

                        Comment


                        • #13
                          I want to know how he keeps the casket from fucking moving and slamming into the seats/divider.

                          Comment


                          • #14
                            A 4-5 foot long casket seems in order.

                            Its always a big challenge to make it seem well.....seamless.
                            Otherwise it looks like someone just threw a miscellaneous seat back there.

                            Comment


                            • #15
                              Originally posted by Zachary View Post
                              Rob Spallone in our club used to have a casket end for this purpose. The casket end was used for display models in funeral homes, so if you call around some you might be able to find one...as illustrated here -
                              Find many great new & used options and get the best deals for Funeral Home Coffin Casket Section Showroom Sample at the best online prices at eBay! Free shipping for many products!


                              http://cgi.ebay.com/Funeral-Home-Cof...item41580e012d



                              Here are a couple on ebay (shipping seems a little excessive tho')

                              Comment

                              Working...
                              X