I need to replace my driver's side bumper filler. I have an '88 Buick LeSabre hearse. Does anyone know what chassis was used to build the car. I am assuming the car was built off the '85 chassis because in '86 the LeSabre got really small. does anyone know if my assumption is correct?
Announcement
Collapse
No announcement yet.
looking for knowledge on buick procars
Collapse
X
-
if you look at the difference between the 6th and 7th generations and then look at the front end of my '88 it looks much more like the 6th gen both in style and size. The bumper on the '88 passenger car is very different. http://en.wikipedia.org/wiki/Buick_LeSabre and here is a picture of my front end.IMAG0308.jpg
Comment
-
hrmmm you may be right, the front of the electra estate wagon looks identical. Kind of weird if they used the electra chassis and the put the lesabre name all over it. http://en.wikipedia.org/wiki/File:ElectraEstate.jpg
Comment
-
All you had to do was search the site for "filler panels" and it would lead you to http://www.replica-plastics.com/. I put a set on my 82 Cadillac hearse. They aren't the greastest fit, but I have seen brand new factory panels that have fit worse. They were reasonable in price and you'll never have to worry about them again. I would seal the backside.
Comment
-
Looks like what you seek is an Electra or LeSabre. But it seems you'll have to get them from an Estate Wagon. All the coupes and 4 doors I found were of the front wheel drive variety.
Comment
Comment